ITEM

Condition

Specification

1.1

Rated Input Voltage

12V DC

1.2

Input Voltage Range

Continuously @ Operating ambient
temperature is 40 Max.

10.8 ~ 13.2Vdc

1.3

Input Frequency Range

Continuously

0 Hz

1.4

Efficiency
(warn up after 1 hour)

12V dc 2A load(Without Cable @On board)

>80%

ITEM

Condition

Specification

2.1

Output Rated Voltage

DC 5V

2.2

Output Current

Load on:at constant current mode ser 0.5V
Or at constant resistance mode ser 0.5V.

2A Max..

2.3

Output Voltage Setting

At the output end of DC connecter

5V~5.8V

2.4

Output Voltage Ripple and Noise:
(0.1uF Ceramic Cap. And 10uF 50V Aluminum Cap. Paralleled between the end of output cable, BW=20MHz)

12V dc 2A Load

<50mV-Ripple & Noise

ITEM

Condition

Specification

3.1

Over Current Protection

When an internal fault occurs, or an
External fault is applied to the adapter, such that an overload or short shall no hazard. It will enter into normal Condition if the fault Condition is been removed.

4.5A
No Hazard.

3.2

Input Over Voltage Protection

The power supply shall be provide with Input Over voltage protection. It will enter into normal Condition if the fault Condition is been removed. The adapter wills auto-recover.

14V ~18.5V(Shut Down and Auto-recover)
No Hazard.

3.3

Input Under Voltage Protection

The power supply shall be provide with Input Under voltage protection. It will enter into normal Condition if the fault Condition is removed. The adapter wills auto-recover.

10.5V~9V (Shut Down and Auto-recover)
No Hazard.

ITEM

Condition

Specification

6.1

Temperature

Operating temperature at Input
Voltage is 12V dc and 2A loan Max.

0 ~ +40°C

6.2

Humidity

Operation
Storage

10% ~ 95% RH
10% ~ 90% RH

6.3

Burn-in Test

40°C+/-10°C. 80% ~100% Load
100% test before shipping.

4 hours